Rolled sections of various sizes are produced by Shyam Steel Industries Ltd. conforming to BIS Standards. High-Quality Billets conforming to IS 2830 having the carbon content of less than 0.2% are used to roll sections. The rolled sections are highly bendable, ductile and easily weldable.

Products that are manufactured undergo a well-documented quality control procedure. The in-house test laboratory is BIS approved and equipped with the most modern and sophisticated equipment for testing of chemical and mechanical properties during the manufacturing process.

The following is the range of Structural steel available with Shyam Steel Industries Ltd.:

ss_angle ss_channels ss_beam
M. S. Angles M. S. Channels M. S. Beams
ss_round ss_squre ss_flats
M. S. Round Bars M. S. Square Bars M. S. Flats

Physical Properties:

Description IS 2062 Fe410 W Shyam Structural Steel
Tensile Strength min. mpa 410 410
Yield Stress Min. mpa
< 20 mm 250 250
20-40mm 240 240
> 40mm 230 230
Percent Elongation at Gauge Length 5.65 (sq.rt So ) min. 23 25

Chemical Properties:

Description Ladle Analysis max. IS 2062 Fe410 WA IS 2062Fe 410 WB Shyam Structural Steel
C% 0.23 0.22 0.2
Mn% 1.5 1.5 1.5
S% 0.05 0.045 0.04
P% 0.05 0.045 0.04
Si% 0.4 0.4 0.4
CE% 0.42 0.41 0.35


Special Features of Shyam Steel Structurals are as follows:


The Structural steel is produced from in-house manufactured fully skilled M.S. Billets. The carbon equivalent of the material is as low as 0.2% ensuring high weldability of the products.

Sectional Weight Tolerance:

The products are rolled strictly in accordance with IS 808-1989.

Dimensional Tolerance:

The Shyam Steel Structurals are rolled in dimension according to IS 808/1989 and IS 1852-1985.


The sections manufactured by Shyam Steel Industries Ltd. are used in the following:

  • Precision Engineering Items
  • Bright Bars
  • Fasteners
  • Transmission Towers
  • Trusses
  • Shades
  • Thermal Hydro Power Projects.